Trim Puncher Irregular Hole Punching/Outline Cutting Machine
Used for film materials for such work sheets as FPCs and touch panels. Metal die punching and half-cutting are also supported.
This model is an irregular hole puncher for film materials in response to various types of product machining requirements, such as FPC connector section trimming and touch panel outline machining. It is characterized by high-accuracy (±20 μm) punching based on image alignment. Metal die punching and half-cutting using a blade are also possible.
Features of Trim Puncher
Irregular hole/outline punching equipment using a small-sized post-less die
- High-accuracy and low-cost irregular hole punching using a compact die
- Both half-cutting type and die supported
- Support of punched chip automatic collection possible (Optional)
![[ Image ] Irregular hole/outline punching equipment using a small-sized post-less die](./file/482/trimpuncher_feature_img06.jpg)
Machining accuracy measurement function
After punching, punching deviation is measured to detect a non-conforming item.
- Model contributing to machining result analysis and product management efficiency improvement
- Correction of punch positions based on the punching deviation tendency contributes to machining accuracy improvement
![[ Image ] Machining accuracy measurement function](./file/424/trimpuncher_feature_img02.jpg)
Roll feed system
Nip roll system (Left)
- Roll fed by driving the nip roll
Grip feeding system (Right)
- Grip feeding operation unlikely to damage work sheets
![[ Image ] Roll feed system](./file/521/trimpuncher_feature_img03.jpg)
Various machining methods and applications supported
Die punching and half-cutting using a blade are supported.
- Punching of various products possible from FPC connector section trimming to touch panel film outline machining
- Prototype making to mass production of various materials supported just with one unit
![[ Image ] Various machining methods and applications supported](./file/426/trimpuncher_feature_img01.jpg)
Work sheet clamps with XY tension mechanism
A work sheet is held stably by clamping its four corners and applying tension.
- Stable machining of a work sheet that is thin or strongly warped made possible by applying tension in the XY-directions
![[ Image ] Work sheet clamps with XY tension mechanism](./file/425/trimpuncher_feature_img04.jpg)
RFID-based die management system
Die information is managed by an RFID system.
- Setup change work simplified and improper installation also prevented by automatically reading the die name and size.
![[ Image ] RFID-based die management system](./file/423/trimpuncher_feature_img05.jpg)
Line up
-
High-speed model T501
- High speed
- 510×510
- 0.55s/shot
-
High-speed model/two-head support T502
- High speed
- 510×510
- 0.70s/shot
- 2 heads
-
High-thrust model T501P
- High thrust
- 510×610
- 0.60s/shot
-
High-thrust model/large sheet support T901
- High thrust
- 900×900
- 1.50s/shot
- Large sheets
-
High-thrust model/automatic loading/unloading support T501P-HA
- High thrust
- 510×610
- 0.60s/shot
- Automatic
-
Roll to Roll supported model T151-RTR
- Roll to Roll
- W158
- 1.8s/shot
-
Roll to Roll supported model/large sheet support T261-GFR
- Roll to Roll
- W260
- 1.9s/shot
Application examples
![[ Image ] Flex PCB](./file/451/work_flexible_img.jpg)
Flex PCB
![[ Image ] Rigid Flex PCB](./file/453/work_rigidflex_img.jpg)
Rigid Flex PCB
![[ Image ] Rigid PCB](./file/461/work_rigid_img.jpg)
Rigid PCB
![[ Image ] Touch Panel](./file/455/work_touchpanel_img.jpg)
Touch Panel
![[ Image ] Various film materials](./file/456/work_films_img.jpg)
Various film materials
![[ Image ] Metallic board etc.](./file/460/work_metal_img.jpg)
Metallic board etc.
Contact point
Inquiry by email
Inquiry by phone
+81-53-467-3601